Whether you are a hobbyist or serious clock maker, our clock movements will fit your needs. They run on one AA battery and are accurate to around 2 minutes per year.
To choose the proper shaft length measure the thickness of the material the clock movement shaft will go through and find the appropriate model in the table below (allow approx. 3mm for the nut, washer and hook as well).
Clock Movements can be combined for price breaks
Each clock movement comes with a nut, washer, rubber gasket, hangar and sweep hand.
PLEASE NOTE CLOCK HANDS ARE SOLD SEPARATELY
|
|
CLOCK ASSEMBLY
1. Hold mechanism with shaft facing upwards
2. Place round hole of the silver hook over the shaft, the small hole (hook) should curve toward the back of the clock mechanism
3. Place rubber washer over shaft
4. Put the shaft through the clock face from the back to the front
5. Place metal washer on the shaft so it is on top of the clock face
6. Firmly screw the metal nut down to hold the clock mechanism in place
7. Push the 'hour' hand over the shaft
8. Push the minute hand over the shaft
9. Line up the pin inside the shaft with the hole in the centre of the sweep hand and press firmly
10. Place a AA battery in the back of the mechanism.