Used for sublimating smaller diameter mugs, glasses and drink bottles, this replacement 9oz mug press heater uses a 4 pin connector to attach to your heat press and is compatible with our range of Freesub Multi Presses.
Volume/Size: 9oz
Heat Pad Area: 20cm (W) x 11.5cm (H)
Shape: Straight Wall
Connector: 4 pin (220V)
Mounting Bracket: C-Shape
Hole Spacing: 3.5cm (four holes spaced 3.5cm apart) / 7cm (two holes spaced 7cm apart)
*Hole spacing measurements are taken from the centrepoint of each hole. Holes are 8mm wide.
To Suit:
DS-HP-P8200 Freesub 5, 8 and 11 in 1 Combination Heat Presses
DS-HP-02 Single Mug Heat Press
DS-HP-05V 4 Mug Heat Press
DS-HP-06 Touch Screen Single Mug Heat Press
Older Models: DS-HP-05, DS-HP-72 5, and 8 in 1 Combination Heat Presses
Best used for: Straight walled mugs, glasses, drink bottles and other cylindrical shaped blanks of a smaller diameter than your standard 11oz mugs or of approximately 7cm in diameter.
NOTE: NO RETURNS on spare parts, please be sure these items are compatible with your equipment