Mayco NT-CLR Clear One Dipping Glaze - 11.4L (3 Gallon)
Preserve and enhance the surface of your work with Mayco’s Clear One Dipping Glaze.
Mayco's NT-CLR Clear One Dipping Glaze balances the production needs of high volume ceramic studios with superior fired performance. NT-CLR dries quickly but stays open long enough to allow for drips and runs to be smoothed away with a fan brush. Higher levels of suspension agents slow down the glaze’s tendency to settle, which means you’ll need to remix less frequently. A lower coefficient of expansion (COE) improves NT-CLR’s ability to withstand thermal shock and minimize crazing.
This glaze will fire to a smooth, crystal clear finish and has been lab tested to be compatible with leading color glaze lines. The bluish-green dye helps identify where glaze has been applied and guard against over application.
Cone 06 oxidation: Fast drying and gloss finish. Compatible with Chrome Tin pigments and luster.
Cone 6 oxidation: No change.
All Mayco Dipping Clear glazes are AP Non-Toxic, Food Safe and Dinnerware Safe, when used according to manufacturer’s directions.
GENERAL USE Container should be kept tightly closed when not in use. Store in a cool, dry place away from heat and vibration. Mixing with a power mixer is required prior to first use (hardware/paint stores offer many drill mounted mixer attachments). Mix for 6-8 minutes. Using a DuPont M-50 viscosity cup or NT-CLR, check viscosity for our recommended viscosity range of 19-22 seconds. If glaze is too thin, remix for an additional 2-3 minutes and re-measure the viscosity. If too thick, add distilled water in 1/2 cup increments. Remix and retest. For best dipping results and operational efficiency use of a dipping container 24” to 30” deep, holding 15 to 30 gallons of glaze.