Mayco PC601 Clear Cascade 473ml

SKU: PT-MY-PC601-16

Out of stock (Due 18/12/2021)

BUY IN BULK AND SAVE!
1+ 6+ 12+ 24+
$49.40 $39.55 $31.65 $24.70

Mayco PC601 Clear Cascade 473ml

Achieve high fire looks at low fire temperatures with Mayco's Clear Cascade 473ml.

Commonly used by low-fire designers who seek to simulate effects of higher fire glazes. Mayco's AP Non-Toxic Food Safe and Dinnerware Safe Cascades can be used to replicate the flowing movement once achieved by using leaded glazes.

General Use:

Apply 1-2 coats with a brush or sponge, under or over another glaze. You can influence the direction of the flow or create a pattern by how you apply the glazes. Allow to dry thoroughly. Fire to cones 06/05. To prevent the glaze from running off your vertical pieces do not apply Pottery Cascades to the bottom third of the piece.

Application Recommendations

  • Shake for 5-6 seconds before use.
  • Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).
  • We advise against dipping your brush directly into the jar to avoid contamination, particularly if you are using one brush to layer Pottery Cascades over other glazes.
  • We recommend that you do not apply Pottery Cascade™ to the lowest third of your piece as these glazes WILL move. Vertical pieces require more attention to this detail than horizontal pieces.
  • Pottery Cascade glazes were designed to mature at a shelf cone 06 (999° C). Make sure the glaze has dried thoroughly prior to firing. A medium ramp/firing rate is recommended (250°F per hour).

 

Helpful Hints:

  • Avoid applying Pottery Cascade on lower third of piece as glaze will move.
  • PC601 Clear Cascade is the most fluid of the Cascade products, requiring care in application.
  • PC602 White Cascade moves the least.
  • Pottery Cascades are luster compatible.

 

Label Instructions:

  • Shake well.
  • For a flowing effect, brush on 1-2 coats over or under other non-toxic glazes on shelf cone 04 bisque (1060° C). Do not apply on bottom half of piece.
  • Let dry.
  • Fire to shelf cone 06 (999° C).
For superb gloss and a beautiful finish.
5
Easy to use. Looks brilliant when fired.  Great value.
| Date:12/9/2020 2:57 PM
Was this review helpful? / (0/0)