SHEET SIZE: 50cm x 30cm
Siser EasyWeed Sub Block HTV Silver
Standard heat transfer vinyl isn’t designed for use on sublimated polyester. If you apply regular HTV to a sublimated garment, you may experience “dye migration.” Dye migration is when the sublimation inks in the garment bleed into the HTV and change the colour of the vinyl. EasyWeed Sub Block (also know as PS Subli LT) is specially formulated to block most dye migration and leave you with a crisp finished product. You can even layer other SIser materials on top to create a more colourful design.
Heat Press Instructions
1. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
2. Preheat garment for 2-3 seconds
3. Apply design at 130°C (EasyPress users add approx. 30°)
4. Use medium pressure for 15 seconds
5. Peel carrier hot or cold
Home iron instructions
1. Set iron dial between Cotton and Linen
2. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
3. Place on flat, hard surface (ironing board not recommended)
4. Press iron with medium/firm pressure (do not slide iron)
5. Press each section of design for 15 seconds
6. Peel carrier hot or cold
7. If areas of design lift after application, place cover sheet and re-press for 10 seconds
Technical Data
- 45 Degree Blade
- 110 Microns
- PU Composition
- Laser Friendly
Suitable for
- Sublimated Polyester
- 100% Polyester
Washing Instructions
Wait 24 hours before first wash. Machine wash cold with mild detergent. Dry on normal dryer setting. Do not bleach or dry clean. Liquid fabric softener not recommended.
